News

  • How To Paint The Conveyor Chain Correctly

    How To Paint The Conveyor Chain Correctly

    How to paint the Conveyor Chain correctly: 1. The surface that has been sprayed and dusted by Conveyor Chain should be immediately primed. Paint should be carried out in a clean place. The ambient temperature should be above 5℃, the humidity should be below 85%, and the surface temperature of the wo... read more

    Oct 12,2020 Industry News
  • Maintenance Knowledge Of Transmission Chain

    Maintenance Knowledge Of Transmission Chain

    The Transmission Chain is a very critical transmission structure in mechanical equipment, which affects the working performance and service life of the equipment. Therefore, it is very necessary to maintain the chain at ordinary times. 1. The sprocket should be installed on the shaft without skew or... read more

    Oct 19,2020 Industry News
  • Precautions For The Use Of Agricultural Chain

    Precautions For The Use Of Agricultural Chain

    Precautions for the use of Agricultural Chain : 1. Good reliability and maintainability. The chain should be resistant to special environments such as abrasion resistance and high-temperature resistance. 2. Good wear resistance. When the chain is working, the sprocket generally has a small number of... read more

    Oct 19,2020 Industry News
  • Drive Chain Cleaning Strategy

    Drive Chain Cleaning Strategy

    Drive Chain cleaning strategy : 1. Hot soapy water, hand sanitizer, use a discarded toothbrush, or a slightly harder brush, you can wash it directly with water. The cleaning effect is not very good, and it needs to be dried after cleaning, otherwise, it will rust. 2. Special chain cleaners are gener... read more

    Oct 26,2020 Industry News
  • 3 Ways To Judge The Quality Of Roller Chain

    3 Ways To Judge The Quality Of Roller Chain

    3 ways to judge the quality of Roller Chain : 1. The quality of the chain can be distinguished from the appearance It mainly depends on the deformation of the chain, as well as the current cracks and corrosion. The other is that the pins, rollers, and top parts can be normal. If there is any loosene... read more

    Oct 26,2020 Industry News
Contact Us