News

  • Conveyor Chain Maintenance Process

    Conveyor Chain Maintenance Process

    How to maintain Conveyor Chain : 1. The tightness of the stainless steel conveyor chain should not be too tight or too loose, otherwise the conveyor chain will be damaged. 2. The stainless steel conveyor chain should be kept clean, avoid sun and rain, and avoid contact with acids, alkalis, organic s... read more

    Aug 31,2020 Industry News
  • How To Correctly Handle The Stick-Slip Phenomenon Of Transmission Chain

    How To Correctly Handle The Stick-Slip Phenomenon Of Transmission Chain

    If the Transmission Chain is stick-slip, it will cause frequent interruptions of the production line, reduce work efficiency, and cause severe corrosion and short life. Transmission Chain handles stick-slip methods as follows: If the chain running speed is below 2m/min, there will be no stick-slip s... read more

    Sep 07,2020 Industry News
  • 4 Common Causes Of Corrosion In Agricultural Chain

    4 Common Causes Of Corrosion In Agricultural Chain

    If the Agricultural Chain is corroded during normal use, it is necessary to analyze the reasons.   1. Failure to strictly follow the anti-corrosion steps. Strictly follow the cleaning and anti-rust regulations and the requirements of oil seal anti-rust packaging for the rust-proof treatment of ... read more

    Sep 07,2020 Industry News
  • Drive Chain Manufacturers Introduces Common Heat Treatment Methods For Hanging Chains

    Drive Chain Manufacturers Introduces Common Heat Treatment Methods For Hanging Chains

    Drive Chain Manufacturers introduces common heat treatment methods for suspension chains: annealing, normalizing, quenching, tempering, carburizing, nitriding, carbonitriding, and boronizing.   1. Annealing, heat the workpiece to 30-50 degrees above Ac3, after holding it for a certain period of... read more

    Sep 14,2020 Industry News
  • Structure Of Roller Chain

    Structure Of Roller Chain

    The structure of Roller Chain:   The outer chain plate and the pin shaft, the inner chain plate and the sleeve are respectively connected by an interference fit. The gap between the sleeve and pin, sleeve, and roller is matched. When the sprocket teeth are engaged with the chain, the friction b... read more

    Sep 14,2020 Industry News
Contact Us