When the stainless steel sprocket has an error, we shou […]
When the stainless steel sprocket has an error, we should not rush to solve it. Let's follow the Roller Chain Manufacturers to correctly handle the error of the sprocket.
Observe the horizontal movement of the stainless steel sprocket drum and the vertical movement of the stainless steel sprocket. If the value of the stainless steel sprocket exceeds 3mm, it should match the roller sleeves on both sides of the long and thin industrial equipment adjustment hole. The specific method is that which side of the stainless steel sprocket is skewed, which side of the guide roller group is on the conveyor belt in the correct direction, or the other side is moved backward.
Inquire about the error of the two plan designs of the top of the stainless steel sprocket head and the protective cover of the machining tool post. If the reason for the deviation of the two plan designs exceeds mm, the two plan designs shall be adjusted within the same plan design.
The adjustment method of the head roller is: if the stainless steel sprocket runs away from the right side of the drum, the spherical bearing on the right side of the drum should move forward or the left spherical bearing should move backward; if the conveyor belt runs away from the left side of the drum, the left side of the drum The spherical bearing should be moved forward or the right spherical bearing should be moved backward. The above-mentioned tail roller is adjusted by the reverse method of the above-mentioned head roller.
Check the orientation of the raw material on the stainless steel sprocket. Raw materials do not have a management plan for the cross-section of the conveyor belt, which will cause the conveyor belt to deviate in the direction. The raw materials are on the right, and the conveyor belt runs on the left, and vice versa. If it is possible, the raw material should be centered vertically. It is convenient to reduce or prevent the error of this kind of stainless steel sprocket and can lift the partition to change the orientation and orientation of the raw material.