Agricultural Chain Manufacturers Introduces The Precautions For Using Conveyor Chains

Among the various types of transmission chains in industrial production, the conveyor chain is a relatively common one, more because its application often leads to frequent damage to the conveyor chain. The damage of the conveyor chain is caused by its fatigue use, and the result is the failure of the conveyor chain, endangering the work efficiency. Below, Agricultural Chain Manufacturers introduce the precautions for using conveyor chains.

After the conveyor chain is damaged, the conveyor chain can be reversed and reused on the side with less damage. In order to reduce its damage, grease can be added to each section of the conveyor chain. Together, it prevents long-term use of the transmission chain, and can also reduce the damage to a lower level.

Long-term use of the conveyor chain will not only cause excessive damage but even make the conveyor chain lose or even misplaced. In order to prevent damage or misalignment of the transmission chain, the tension of the transmission chain should be increased. In the final analysis, it is necessary to buy a good quality transmission chain, so as to improve the production and processing accuracy of the transmission chain and the strength of the tunneling face.

Pay more attention when installing the conveyor chain. It must be installed parallel to the drive chain axis and properly reviewed so that the damage to the drive chain can be reasonably reduced, otherwise it will cause the drive chain axis to deviate, which is more serious. Affect the normal operation of the conveyor chain.