news

Silent Chain Manufacturers Introduces The Precautions For Adjusting The Chain

Update:15-12-2020
Summary:

Silent Chain Manufacturers introduces the precautions f […]

Silent Chain Manufacturers introduces the precautions for adjusting the chain, hoping to help you:

 

The tightness of the chain should be kept between 15mm and 20mm. The precautions when adjusting the chain often check the buffer body bearing and fill it with smooth grease on time. Because the bearing has a harsh operating environment, once it loses its smoothness, it may be damaged. If the bearing is damaged, it will cause the rear sprocket to skew. In the lighter case, the side surface of the sprocket chain will be worn away, and the heavy case will easily cause the chain to fall.

 

When chaining the chain, in addition to adjusting the scale according to the frame chain, it also uses the eye to investigate whether the front and rear chainrings and the chain are in the same straight line, because if the frame or rear wheel fork has been damaged and deformed, the chain will be adjusted according to its scale. There is a misunderstanding that the chaining chain is in the same straight line, the true straightness has been damaged, so this check is very important.

 

After the gap of the chain bearing increases, the straightness of the countershaft will be damaged, and the needle bearing will soon be damaged due to this. At this moment, the problem will be transferred from the chain gear to the initiator. It can be seen that it is very important to adjust the tension of the chain correctly and timely. important.

0
Contact Us