news

Silent Chain Manufacturers Introduces How To Deal With The Error Of Stainless Steel Sprocket Correctly

Update:18-01-2021
Summary:

Silent Chain  Manufacturers introduces how to deal with […]

Silent Chain  Manufacturers introduces how to deal with the error of stainless steel sprocket correctly?

 

Observe the horizontal movement of the stainless steel sprocket drum and the vertical movement of the stainless steel sprocket. If the value of the stainless steel sprocket exceeds 3mm, it should be related to the roller sleeves on both sides of the adjustment hole of the industrial equipment. The specific method is which side of the stainless steel sprocket is skewed, which side of the guide roller group is on the conveyor belt in the correct direction, or the other side is moved backward.

 

Check the design error of the two plan drawings of the top of the stainless steel sprocket head and the protective cover of the processing tool post. If there is a deviation on both sides, it should be adjusted appropriately.


 
The adjustment method of the head roller is: if the stainless steel sprocket runs away from the right side of the drum, the spherical bearing on the right side of the drum should move forward or the left spherical bearing should move backward; if the conveyor belt runs away from the left side of the drum, the left side of the drum The spherical bearing should be moved forward or the right spherical bearing should be moved backward.

 

Check the orientation of the raw material on the stainless steel sprocket. The raw material does not have the center of the conveyor belt section, which will cause the conveyor belt to deviate in the direction. The raw materials are on the right, and the conveyor belt runs on the left, and vice versa. If it is possible, the raw material should be centered vertically. It is convenient to reduce or prevent the error of this kind of stainless steel sprocket and can raise the partition to change the orientation of the raw material.

0
Contact Us