Requirements For The Use Of China Drive Chain

Requirements for the use of the China Drive Chain:

1. Ensure that the sprocket and chain can always mesh smoothly. The basic requirement is that the tooth pitch should be commensurate, and there should be no signs of interference between the teeth and the chain. The teeth of the stainless steel sprocket should be able to adapt to the characteristics of the lengthened chain pitch and participate in the design to prevent the stainless steel chain from falling off due to jumping, so reasonable processing techniques should be adopted. Food chain conveyor, food belt conveyor, food belt conveyor, food roller conveyor, food screw conveyor, food bucket elevator, etc. After the tooth surface of the sprocket is worn to a certain degree, it should be turned over in time to extend the use time.

2. The loose part of the stainless steel chain should be in full contact with the stainless steel sprocket. If it is too loose, it is easy to cause the stainless steel chain to break or wear. If it is too tight, it will affect power consumption. There are relevant standards for tightness. When it is lifted or pressed down from the middle of the chain, the middle distance between the two sprockets is about 2%. If the chain is too long, one or two sections should be removed to make it suitable, but the number of chain links must be the same. The chain link should pass through the back of the chain, and the lock piece should be inserted outside. The opening of the locking part should face the opposite direction of rotation. The old chain cannot be mixed with some new chains, otherwise, it is easy to break due to impact during transmission. Lubricating oil should be added to the chain in time during operation. Lubricating oil must enter the gap between the roller and the inner sleeve to improve working conditions and reduce wear. The use of chain drive is a science, so it is necessary, to sum up, the experience in use so that the equipment can give full play to its special functions, save money for the company, and obtain greater benefits.