Installation Guide Of Leaf Chain

Nowadays, in industrial production or life, you will see the figure of chains. No matter what kind of style they exist, they will show their value. For example, Leaf Chain is also one of the widely used chains, so today we will take a look at this type of chain. How to install the chain:

1. First, keep the two shafts in balance and the two wheels in the same plane. The purpose of doing this is also to ensure that the subsequent operations can be error-free, to better save time, and improve work efficiency.

2. Secondly, check whether the sprocket and the shaft are connected reliably, and the chain is not allowed to be over-tensioned. Because over-tensioning can cause damage to the chain, the gain is not worth the loss, so the proper tightness can extend the life of the chain.

3. Again, keep a certain gap between the chain and the chain cover, and do not use a new chain with a severely worn sprocket. Because the new and old chains are used together, they will not match, and the old chain will not keep up with the speed of the new chain, so it is better to replace them all at once.

4. Finally, the chainrings are connected reliably, and the open end of the circlip is opposite to the direction of rotation. After the installation is complete, it is recommended to check carefully to prevent damaging information from appearing during normal use.