Industrial Sprocket Factory Introduces How To Repair The Smooth Surface Of The Chain

In order to meet the installation requirements of different specifications of machinery, the selection specifications of the stainless steel chain are also different. After using the stainless steel chain for a period of time, due to certain factors, rust spots often appear on the surface. The appearance of rust spots greatly reduces the smoothness of the stainless steel chain. To solve the problem, the life of the stainless steel chain will be shortened. In this case, once the oxidation points on the surface of the stainless steel power chain are treated in time, the life of the stainless steel chain can be increased. Then, Industrial Sprocket Factory introduces how to repair the smooth surface of the chain:

Pickling cream can be used to remove rust spots and help improve the surface finish. When handling stainless steel with a stainless steel chain, apply pickling paste on the surface of the stainless steel chain to completely remove the oxidation spots. In order to avoid oxidation, it is easy to wash with water, but it will not work after a problem occurs. It should be avoided in advance, and the corrosion of stainless steel chains and acid and alkali should be avoided as much as possible. In order to reduce the possibility of rust spots, the working environment of stainless steel chains should be controlled.

In addition to being used for machinery and equipment, stainless steel chains can also be used for machinery. The two railings only need to be connected by a stainless steel chain to form a whole. Although the stainless steel chain of the railing is very strong, it is exposed to the outside for a long time and exposed to the wind and rain. Therefore, the quality of the stainless steel chain should be paid more attention to here. In fact, the thickness of the stainless steel chain affects safety.

If the chain is used as a railing chain, the thickness of the stainless steel chain should be considered. The maintenance of railing chains is usually done by painting. As long as the waste oil is evenly applied to the mechanical stainless steel chain, it can be used for maintenance, which is very convenient. Another method is to use oil and butter metal and heat it together with the stainless steel chain. The purpose is to make the liquefied solid-fluid enter the friction surface of the winding, effectively reduce the friction between the railing conditions, and have a good curing effect on the stainless steel chain.