Industrial Chain Manufacturers Introduces The Precautions For Using Functional Chains

Industrial Chain Manufacturers introduces the precautions for using functional chains:

1. Air temperature and freezing: In the case of the temperature difference between day and night in winter, the conveying device may occur) Dongjie, while adding lubricating oil and performing maintenance, please pay attention to the change of temperature for conveying materials that contain moisture. The operation of the conveying device.

2. Storage of the spare chain: In order to prevent failure, it is recommended to prepare a spare chain. When temporarily storing spare chains, please stack them in a room with low humidity. In addition, for long-term storage, please apply anti-corrosion oil. Please attach a label with the product name, drawing number, date of purchase, name of the equipment used, etc. to the chain for easy storage.

3. When stopping operation: the conveying device must be stopped in the no-load state. This is because it may cause overload when starting. In addition, if the operation is stopped for a long time, the key strip must be inspected and repaired before starting the conveying device.

4. Fixing of parts: boxes, buckets, slats, and other conveying devices that are fixed on the chain by bolts, due to vibration during operation, may cause the nuts to loosen and fall off, so please install a buffer sheet.

5. Cleaning: When foreign objects or transported objects are attached to the chain or chain guide, please clean it regularly.

6. Preventive protection of the conveyor belt: If you make a maintenance record of the conveying device, regularly record the conveying capacity, conveying speed, spindle rotation speed, current, voltage, power, actual running time, actual conveying volume, overhaul, and the date of adding lubricating oil. Accidents and other content can prevent accidents and facilitate maintenance.

7. Storage of the chain and sprocket: Do not store the chain and sprocket in locations where there is dust, slag, and rain. In order to prevent the sprocket from rusting, please use a brush to apply lubricating oil, because it is not correct when shipped. The chain is treated with anti-rust treatment, so when storing it, please apply anti-rust oil and regularly check and repair it.