Industrial Chain Manufacturers Introduces The Cause Of Noise In The Chain

After long-term application, many conveyor chain machinery and equipment will cause a certain amount of noise. When the conveyor chain is in operation, the roller bending chain often causes abnormal noise and regular vibration, especially when returning to the roller, due to its large length, heavy net weight, and high noise. Below, Industrial Chain Manufacturers introduces the reasons for chain noise:

1. The thickness of the seamless tube used to manufacture the roller is uneven, and the centripetal force caused is relatively large.

2. During the production and processing of the conveyor chain, the error between the rolling bearing holes on both sides and the outer circle is large, so the centripetal force is large.

Solutions to common chain failures:

1. If the rolling bearing is not damaged and noise is allowed, the rolling bearing can be used again. The noise when the two axes of the conveyor chain are not the same axis. The abnormal noise caused by the coupling between the fast end motor of the push module and the reducer or coupling with the wheel of the brake system will continue to follow the same vibration as the motor rotation frequency. Plate chain.

2. The speed reducer of the conveyor chain motor should be adjusted immediately to prevent the speed reducer from breaking. The conveyor chain phase change roller and the push roller bending chain have abnormal noises. When the commutation roller and the push roller are all working normally, the noise is not big. When an abnormal noise occurs, the rolling bearing will generally be destroyed, and the seated bearing will emit a rattling sound.