Industrial Chain Manufacturer Introduces The Lubrication Form Of The Chain

The type of chain lubrication will vary depending on the way the chain is used. Industrial Chain manufacturer introduced that most chain drives will use drip lubrication and oil bath lubrication, and there are also oil spray lubrication and oil rope lubrication.

Drip lubrication is generally used for faster, long-interval conveyor chains. For example, the chain of baking equipment, the chain of textile equipment, etc. The characteristics of this lubrication method are good lubrication effect, less waste, without any restriction, but poor lubrication uniformity.

For high-speed transmission chains, oil injection lubrication is mostly adopted. The characteristics of this lubrication method are: good lubrication effect, good uniformity, certain limitations, but large waste.

Oil bath lubrication is generally used for closed chain transmission. Such as oil field drilling equipment, etc. The characteristics of this lubrication method are: it should be said that it is the most ideal lubrication method, but it is subject to many restrictions.

There are other lubrication methods, especially those very short chains, which are almost all manually applied: one of the most undesirable lubrication methods.